Our Powder Coated Steel Dual Row burner pan kits come complete with everything you need to start your Natural Gas (NG) indoor or outdoor fire pit project. First we start with high grade steel and powder coat it black for additional longevity. With three rows of burners, you will fill your fireplace or fire pit with dancing flames. Our 14 inch wide flat pan provides a stable base for your burner. With a 1/2 inch hub on both ends allowing you to connect from either side. With three rows of burners you get 33% more flames than other burners. All this adds up to exactly what you are looking for in a flame burner; the highest possible flames.Please note that your incoming gas line size needs to be matched to the size of burner you want. There are many different ways to build your fire pit one way is to lay a base of lava rock and place our burner pan directly on top of the lava rocks. Now either place more lava rocks over the top of the pan or for the most incredible fire display pour Dreffco fire glass crystals over the top of the burner covering it by 1-2 inches of glass. We strongly recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes. CHECK OUT OUR ENTIRE LINE OF BURNERS AND FIRE GLASS IN OUR AMAZON STORE.
- Triple Row Burner Construction
- Approx. 60,000 BTU
- Pan dimensions: 16.5″L x 14″W plus 3/4″L x 1/2″ connection hubs on both ends
- NG Orifice, 10″x3/8″ Non-Whistle Flex Line, Connection Fittings
- See Our Entire Line of Burners and Fire Glass Crystals